Trihalomethanes in global drinking water: Distributions, risk assessments, and attributable disease burden of bladder cancer.

This study aimed to assess the global spatiotemporal variations of trihalomethanes (THMs) in drinking water, evaluate their cancer and non-cancer risks, and THM-attributable bladder cancer burden. THM concentrations in drinking water around fifty years on a global scale were integrated. Health risks were assessed using Monte Carlo simulations and attributable bladder cancer burden was estimated by comparative risk assessment methodology. The results showed that global mean THM concentrations in drinking water significantly decreased from 78.37 µg/L (1973-1983) to 51.99 µg/L (1984-2004) and to 21.90 µg/L (after 2004). The lifestage-integrative cancer risk and hazard index of THMs through all exposure pathways were acceptable with the average level of 6.45 × 10-5 and 7.63 × 10-2, respectively. The global attributable disability adjusted of life years (DALYs) and the age-standardized DALYs rate (ASDR) dropped by 16% and 56% from 1990-1994 to 2015-2019, respectively. A big decline in the attributable ASDR was observed in the United Kingdom (62%) and the United States (27%), while China experienced a nearly 3-fold increase due to the expanded water supply coverage and increased life expectancy. However, China also benefited from the spread of chlorination, which helped reduce nearly 90% of unsafe-water-caused mortality from 1998 to 2018.

Rapid degradation of brominated haloacetaldehydes at elevated temperature: Kinetics and newly discovered mechanisms.

As an important class of disinfection byproducts (DBPs) of emerging concern, haloacetaldehydes (HALs) undergo degradation and transformation under environmentally relevant conditions. In this study, the stability of chlorinated and brominated HALs was investigated at different pHs and water temperatures. Results indicated that the degradation of HALs followed second-order kinetics. Surprisingly, rapid degradation of Br-HALs at elevated temperature was newly discovered in this study. At 50 °C and pH 7.5, over 90 % of TBAL degraded in 8 min, while the degradation of TCAL was ∼1 %. Moreover, increasing pH also facilitated the degradation of HALs and the alkaline degradation rate constants ( [Formula: see text] ) were found to be 7-9 orders of magnitude higher than their neutral degradation rate constants ( [Formula: see text] ). Under conditions relevant to environment and DBP measurement, HALs mainly degraded to form corresponding trihalomethanes and formate via decarburization pathway, which accounted for 70-93 % of HALs loss. The remaining 7-30 % of HAL loss was attributed to the dehalogenation pathway newly proposed in this study, successfully closing halogen balance during HAL degradation. In addition, a quantitative structure-activity relationship (QSAR) model was established for HAL degradation and the degradation rate constants for three mono-HALs were predicted at different temperature. The kinetic models and reaction rate constants obtained in this study can be used for quantitative predictions of HAL concentrations in drinking water, which is beneficial for monitoring and control of these emerging DBPs. Furthermore, considering the rapid degradation of Br-HALs into corresponding products, the temperature during sample pre-treatment can have a significant impact on DBP analysis.

Climate change and future water demand: Implications for chlorine and trihalomethanes management in water distribution systems.

The global change in surface water quality calls for increased preparedness of drinking water utilities. The increasing frequency of extreme climatic events combined with global warming can impact source and treated water characteristics such as temperature and natural organic matter. On the other hand, water saving policies in response to water and energy crisis in some countries can aggravate the situation by increasing the water residence time in the drinking water distribution system (DWDS). This study investigates the individual and combined effect of increased dissolved organic carbon (DOC), increased temperature, and reduced water demand on fate and transport of chlorine and trihalomethanes (THMs) within a full-scale DWDS in Canada. Chlorine and THM prediction models were calibrated with laboratory experiments and implemented in EPANET-MATLAB toolkit for prediction in the DWDS under different combinations of DOC, temperature, and demand. The duration of low chlorine residuals (<0.2 mg/L) and high THM (>80 µg/L) periods within a day in each scenario was reported using a reliability index. Low-reliability zones prone to microbial regrowth or high THM exposure were then delineated geographically on the city DWDS. Results revealed that water demand reduction primarily affects chlorine availability, with less concern for THM formation. The reduction in nodal chlorine reliability was gradual with rising temperature and DOC of the treated water and reducing water demand. Nodal THM reliability remained unchanged until certain thresholds were reached, i.e., temperature >25 °C for waters with DOC <1.52 mg/L, and DOC >2.2 mg/L for waters with temperature = 17 °C. At these critical thresholds, an abrupt network-wide THM exceedance of 80 µg/L occurred. Under higher DOC and temperature levels in future, employing the proposed approach revealed that increasing the applied chlorine dosage (which is a conventional method used to ensure sufficient chlorine coverage) results in elevated exposure toTHMs and is not recommended. This approach aids water utilities in assessing the effectiveness of different intervention measures to solve water quality problems, identify site-specific thresholds leading to major decreases in system reliability, and integrate climate adaptation into water safety management.

Formation and control of disinfection by-products during the trichloroisocyanuric acid disinfection in swimming pool water.

The increasing demand for trichloroisocyanuric acid (TCCA) in swimming pool disinfection highlights the need to evaluate its applicability in terms of disinfection by-product (DBP) formation. Nevertheless, there is limited understanding of DBP formation and control during TCCA disinfection, particularly concerning the effects of various management parameters. This study aimed to fill this knowledge gap by comprehensively investigating DBP formation during TCCA chlorination, with a particular focus on assessing the contribution and interaction of influencing factors using Box-Behnken Design and response surface methodology. Results indicated that the concentrations of trichloroacetaldehyde, chloroform, dichloroacetic acid, trichloroacetic acid, and dichloroacetonitrile produced by TCCA disinfectant were 42.5%, 74.0%, 48.1%, 94.7% and 42.6% of those by the conventional sodium hypochlorite disinfectant, respectively. Temperature exhibited the most significant impact on chloroform formation (49%), while pH played a major role in trichloroacetaldehyde formation (44%). pH2 emerged as the primary contributor to dichloroacetic acid (90%) and trichloroacetic acid (93%) formation. The optimum water quality conditions were determined based on the minimum total DBPs (pH = 7.32, Temperature = 23.7 °C, [Cl-] = 437 mg/L). Chlorine dosage and contact time exhibited greater influence than precursor concentration on chloroform, dichloroacetonitrile, trichloroacetaldehyde, trichloroacetic acid, and total DBPs. Although the interaction between water quality parameters was weak, the interaction between disinfection operating parameters demonstrated substantial effects on DBP formation (8.56-19.06%). Furthermore, the DBP predictive models during TCCA disinfection were provided for the first time, which provides valuable insights for DBP control and early warning programs.

Exposure to disinfection by-products and risk of cancer: A systematic review and dose-response meta-analysis.

Disinfection by-products (DBPs), including trihalomethanes (THMs) and haloacetic acids (HAAs), have attracted attention due to their carcinogenic properties, leading to varying conclusions. This meta-analysis aimed to evaluate the dose-response relationship and the dose-dependent effect of DBPs on cancer risk. We performed a selective search in PubMed, Web of Science, and Embase databases for articles published up to September 15th, 2023. Our meta-analysis eventually included 25 articles, encompassing 8 cohort studies with 6038,525 participants and 10,668 cases, and 17 case-control studies with 10,847 cases and 20,702 controls. We observed a positive correlation between increased cancer risk and higher concentrations of total trihalomethanes (TTHM) in water, longer exposure durations, and higher cumulative TTHM intake. These associations showed a linear trend, with relative risks (RRs) and 95 % confidence intervals (CIs) being 1.02 (1.01-1.03), 1.04 (1.02-1.06), and 1.02 (1.00-1.03), respectively. Gender-specific analyses revealed slightly U-shaped relationships in both males and females, with males exhibiting higher risks. The threshold dose for TTHM in relation to cancer risk was determined to be 55 µg/L for females and 40 µg/L for males. A linear association was also identified between bladder cancer risk and TTHM exposure, with an RR and 95 % CI of 1.08 (1.05-1.11). Positive linear associations were observed between cancer risk and exposure to chloroform, bromodichloromethane (BDCM), and HAA5, with RRs and 95 % CIs of 1.02 (1.01-1.03), 1.33 (1.18-1.50), and 1.07 (1.03-1.12), respectively. Positive dose-dependent effects were noted for brominated THMs above 35 µg/L and chloroform above 75 µg/L. While heterogeneity was observed in the studies for quantitative synthesis, no publication bias was detected. Exposure to TTHM, chloroform, BDCM, or HAA5 may contribute to carcinogenesis, and the risk of cancer appears to be dose-dependent on DBP exposure levels. A cumulative effect is suggested by the positive correlation between TTHM exposure and cancer risk. Bladder cancer and endocrine-related cancers show dose-dependent and positive associations with TTHM exposure. Males may be more susceptible to TTHM compared to females.

Low Parts Per Trillion Detection of Iodinated Disinfection Byproducts in Drinking Water and Urine using Vacuum-Assisted Sorbent Extraction and GC-MS/MS.

Disinfection byproducts (DBPs) are ubiquitous environmental contaminants, which are present in virtually all drinking water and linked to detrimental health effects. Iodinated-DBPs are more cytotoxic and genotoxic than chloro- and bromo-DBPs and are formed during disinfection of iodide-containing source water. Liquid-liquid extraction (LLE) paired with gas chromatography (GC)-mass spectrometry (MS) has been the method of choice in the study of low molecular weight iodinated-DBPs; however, this method is laborious and time-consuming and struggles with complex matrices. We developed an environmentally friendly method utilizing headspace solid phase extraction with the application of vacuum to measure six iodinated-trihalomethanes (I-THMs) in drinking water and urine. Vacuum-assisted sorbent extraction (VASE) has the ability to exhaustively and rapidly extract volatile and semivolatile compounds from liquid matrices without the use of solvent. Using VASE with GC-MS/MS provides improved analyte recovery and reduced matrix interference compared to LLE. Additionally, VASE enables extraction of 30 samples simultaneously with minimal sample handling and improved method reproducibility. Using VASE with GC-MS/MS, we achieved quantification limits of 3-4 ng/L. This technique was demonstrated on drinking water from four cities, where five I-THMs were quantified at levels 10-33 times below comparable LLE methods with 10 times lower volumes of sample (10 mL vs 100 mL).

Adsorption, boiling or membrane filtration for disinfection by-product removal: How to make our drinking water safer?

Disinfection by-products (DBPs) generated in drinking water have become a global concern due to their potential harm to human health. Nevertheless, there are few studies about different point-of-use water treatments in household drinking water. The study aims to compare the effectiveness of three point-of-use water treatments: adsorption, boiling, and membrane filtration. The experimental results showed that the initial average concentration of volatile DBPs and non-volatile DBPs for tap water were 63.71 µg/L and 6.33 µg/L. The removal efficiency of DBPs for adsorption which were 75.6 % (the filter volumes from 0 L to 20 L) and 45.4 % (the filter volumes from 20 L to 50 L) during the service life of the filter element (50 L). Boiling had a high removal efficiency for volatile DBPs like trihalomethanes (THMs), haloacetaldehydes (HALs), haloacetonitriles (HANs), and haloketones (HKs) (90.5 %, 100 %, 100 %, and 100 %, respectively). However, boiling had a low removal efficiency which was 15 % in removing non-volatile DBPs like haloacetic acids (HAAs). Membrane filtration had a middle removal efficiency for THMs, HAAs, HALs, HKs, and HANs (45.3 %, 75.2 %, 46.5 %, 47.6 %, and 100 %, respectively). Through analysis of the correlation between dissolved organic matter (DOM) removal efficacy and DBP removal efficiency, it was found that the strongest correlation was observed between UV254 and DBP removal efficiency. Boiling showed a lower estimated cytotoxicity of DBPs compared to adsorption and membrane filtration. Cancer risk assessment of DBPs was below the specified risk range for three point-of-use water treatments. This study provides a reference for choosing point-of-use water treatments in household drinking water.

Trihalomethanes in developed and developing countries.

The reactions between natural organic matter, anthropogenic contaminants, ions, and disinfectants lead to the formation of disinfection by-products (DBPs) such as trihalomethanes (THMs) in drinking water. The formation of THMs is strongly related to the chlorination of water. The study's central objective was to compare the concentration of THMs in twenty developed and developing countries and their disinfection techniques. The THM concentration in 11 developed and 9 developing countries ranged from 0.5 µg/L (Germany) to 215 µg/L (Russia) and 3 µg/L (China) to 439.2 µg/L (Bangladesh), respectively. The developed country has partially succeeded in reducing THM concentration in drinking water, whereas significant steps are needed in developing countries to reduce the existing high THM concentration. The concentration of THMs in water varies among these countries because of the different water sources, water quality, environmental conditions, and efficiency of water treatment technologies. A meaningful relationship has been observed between the properties of water and the THM formation. The use of chemical disinfectants will result in new forms of DBPs that are undesirable due to their carcinogenic and mutagenic effects on human health. The DBP guidelines by various national and international agencies have helped to control and manage the THM concentration in drinking water. However, these regulatory standards are not continuously monitored. Therefore, the formation of these compounds should be prevented either by removing THMs forming precursors or by using an integrated approach for controlling THM formation by implementing advanced water treatment technology. Extensive research is desirable in domains like THM minimization strategies which are easy to deploy, scalable, and cost-effective.

Exposure to Trihalomethanes and Bone Mineral Density in US Adolescents: A Cross-Sectional Study (NHANES).

Animal and human studies have suggested that trihalomethane (THM) has toxicity to bone. In this study, we included adolescents from the National Health and Nutrition Examination Survey who had quantified blood and tap water THM concentrations [chloroform (TCM), bromodichloromethane (BDCM), dibromochloromethane (DBCM), and bromoform (TBM)] and lumbar spine or total body less head (TBLH) bone mineral density (BMD). A 2.7-fold increase in concentrations of blood TCM, DBCM, chlorinated THMs (the sum of TCM, BDCM, and DBCM), and total THMs (the sum of 4 THMs) was associated with lower lumbar spine BMD z-scores by -0.06 [95% confidence interval (CI): -0.12, -0.01], -0.06 (95% CI: -0.11, -0.003), -0.08 (95% CI: -0.14, -0.02), and -0.07 (95% CI: -0.13, -0.003), respectively, in adjusted models. Similarly, a 2.7-fold increase in blood BDCM, DBCM, and chlorinated THM concentrations was associated with lower TBLH BMD z-scores by -0.10 (95% CI: -0.17, -0.02), -0.10 (95% CI: -0.17, -0.03), and -0.11 (95% CI: -0.20, -0.01), respectively. Low-to-moderate predictive power was attained when tap water THM concentrations were used to predict blood THM measurements. Notably, the inverse associations for blood THMs persisted exclusively between water concentrations of DBCM and Br-THMs and the TBLH BMD z-scores. Our findings suggest that exposure to THMs may adversely affect the adolescent BMD.

Metabolomic Signatures of Exposure to Nitrate and Trihalomethanes in Drinking Water and Colorectal Cancer Risk in a Spanish Multicentric Study (MCC-Spain).

We investigated the metabolomic profile associated with exposure to trihalomethanes (THMs) and nitrate in drinking water and with colorectal cancer risk in 296 cases and 295 controls from the Multi Case-Control Spain project. Untargeted metabolomic analysis was conducted in blood samples using ultrahigh-performance liquid chromatography-quadrupole time-of-flight mass spectrometry. A variety of univariate and multivariate association analyses were conducted after data quality control, normalization, and imputation. Linear regression and partial least-squares analyses were conducted for chloroform, brominated THMs, total THMs, and nitrate among controls and for case-control status, together with a N-integration model discriminating colorectal cancer cases from controls through interrogation of correlations between the exposure variables and the metabolomic features. Results revealed a total of 568 metabolomic features associated with at least one water contaminant or colorectal cancer. Annotated metabolites and pathway analysis suggest a number of pathways as potentially involved in the link between exposure to these water contaminants and colorectal cancer, including nicotinamide, cytochrome P-450, and tyrosine metabolism. These findings provide insights into the underlying biological mechanisms and potential biomarkers associated with water contaminant exposure and colorectal cancer risk. Further research in this area is needed to better understand the causal relationship and the public health implications.

Temporal and spatial variations of disinfection by-products in South Taihu's drinking water, Zhejiang Province, China.

Some disinfection by-products (DBPs) in drinking water present a potential safety concern. This study focuses on the elements influencing DBPs formation. A total of 120 water samples were collected from 10 different drinking water facilities spanning 5 counties within Huzhou, Zhejiang Province, China. Concentrations of trihalomethanes (THMs) and haloacetic acids (HAAs) were observed to be 14.5 and 27.4 µg/L, respectively, constituting 34 and 64% of the total DBPs. Seasonal fluctuations demonstrated that HAAs, THMs, halonitromethanes (HNMs), and haloacetonitriles (HANs) followed a similar pattern with higher levels in summer or autumn compared to spring. Importantly, the concentrations of HAAs and THMs were markedly higher in Taihu-sourced water compared to other sources. Geographically, Nanxun exhibited the highest levels of total DBPs, HAAs, and THMs, while Deqing and Changxing demonstrated significantly lower levels. Correlation studies between water quality parameters and DBPs revealed that factors such as chloride content, temperature, and residual chlorine positively influenced DBPs formation, whereas turbidity negatively affected it. Principal component analysis suggested similar formation processes for HANs, haloketones (HKs), HNMs, and THMs. Factors such as temperature, chemical oxygen demand (COD), and residual chlorine were identified as significant contributors to the prevalence of HAAs.

Blood Trihalomethane Concentrations and Osteoarthritis among U.S. Population Aged over 50 Years.

Exposure to trihalomethanes (THMs) has been associated with inflammation and oxidative stress, which are implicated in osteoarthritis. However, the association of THM exposure with osteoarthritis is unknown. Therefore, we pooled seven independent National Health and Nutrition Examination Survey cycles (1999-2012) among participants aged over 50 years who had quantified blood concentrations of chloroform (TCM), bromodichloromethane (BDCM), dibromochloromethane (DBCM), and bromoform (TBM). Among 4,077 adults aged over 50 years, 781 (21.3%) reported osteoarthritis. Logistic regression models showed increased odds of osteoarthritis across the categories of blood BDCM, DBCM, and brominated THM (Br-THM, which was the sum of BDCM, DBCM, and TBM) concentrations [odds ratios = 1.46 (95% CI 1.09-1.94), 1.53 (95% CI 1.15-2.04), and 1.35 (95% CI 0.97-1.88), respectively], comparing highest versus lowest exposure categories (quartiles or tertiles). Additionally, we found positive dose-response relationships between blood BDCM, DBCM, and Br-THM concentrations and serum markers of oxidative stress (i.e., gamma-glutamyltransferase). In summary, blood Br-THM concentrations were associated with elevated serum levels of gamma-glutamyltransferase as well as an increased risk of osteoarthritis among U.S. adults aged over 50 years. However, more prospective population studies are needed to verify these findings and explore the underlying mechanisms.

DBP-FP change of biofilm in drinking water distribution system induced by sequential UV and chlorine disinfection: Effect of UV dose and influencing mechanism.

The issue of biofilm-related disinfection byproducts (DBPs) in drinking water distribution system (DWDS) has garnered significant attention. This study sought to examine the changes in biofilm-originated halogenated DBP formation potential (biofilm DBP-FP) in simulated continuous-flow DWDSs subjected to sequential UV and chlorine disinfection (UV-Cl2) treatments with varying UV doses and to propose the underlying mechanism. The formation potential of trihalomethanes (THMs), haloacetic acids (HAAs), and the total organic halogen (TOX, X = Cl and Br) produced by biofilm were measured. Results showed that the biofilm TOCl-FP was at a minimum with a UV dose of 80 mJ/cm2, corresponding to the lowest amounts of protein and polysaccharides in the extracellular polymeric substances (EPS). Sphingobium, Methylobacterium, and Sphingomonas played a crucial role in protein and polysaccharide biosynthesis. Bacterial community composition characterization together with metabolic function analysis indicated that dominant bacteria varied and metabolic function shifted due to UV-Cl2 disinfection, with Alphaproteobacteria increasing in relative abundance and Bacteroidia showing the opposite trend with increasing UV doses. Correlation analysis suggested that the UV-Cl2 disinfection process led to changes in the water matrix, including organics, inorganics, bacteria, and components that provide environmental pressure for the biofilm. These changes ultimately influenced the properties of the biofilm EPS, which had a direct impact on biofilm DBP-FP.

Potential and mechanism of disinfection by-products removal in drinking water by bubbling corona discharge.

Disinfection by-products (DBPs) with significant teratogenic and carcinogenic properties have become a growing concern among the public. As an efficient and environmentally friendly technology, non-thermal plasma offers potential for removing emerging micro-pollutants. In this study, the degradation performance of bubbling corona discharge was evaluated on 24 halogenated alicyclic and aliphatic DBPs present in drinking water at concentrations ranging from ng/L to µg/L. The degradation of DBPs followed pseudo-first-order kinetics with rate constants (kobs) in the descending order of halonitromethanes (HNMs), halogenated benzoquinones (HBQs), haloacetonitriles, trihalomethanes (THMs), haloketones, halogenated aldehydes, and haloacetic acids (HAAs). THMs, HNMs, and HBQs were effectively removed within 5 min under a discharge power of 28 W. Degradation rates achieved by plasma treatment surpass those of other conventional treatment technologies. The required energy consumption was in the range of 5-30 kW·h/m3/order. Furthermore, the study investigated the effects of discharge power, initial concentration, and economic analysis on the degradation of four selected DBPs as representatives of mono-, di- and multi-carbon-containing DBPs, namely chloroform (TCM) and bromoform (TBM), tribromoacetic acid (TBAA), and 2,3,5,6-tetrachloro-1,4-benzoquinone (TetraC-BQ). Reactive radicals in the plasma system were investigated using electron paramagnetic resonance, optical emission spectroscopy, fluorimetry, and radical scavengers. Hydrated electrons and hydroxyl radicals played an important role in the removal of DBPs. The intermediates generated during the degradation of TCM, TBM, TBAA, and TetraC-BQ were identified, and the possible degradation pathways for mono- and binary C-DBPs and HBQs were deduced. The breakdown of HBQs did not produce secondary contamination with aliphatic DBPs. The carbon in DBPs was primarily converted to formic acid, acetic acid, and oxalic acid, and the halogens were mainly converted to halogen ions. Additionally, luminescent bacteria toxicity testing confirmed that plasma treatment could reduce the acute toxicity of water samples. These findings demonstrate the potential of plasma treatment as a post-treatment device at the household level.

Recent progress in identification of water disinfection byproducts and opportunities for future research.

Numerous disinfection by-products (DBPs) are formed from reactions between disinfectants and organic/inorganic matter during water disinfection. More than seven hundred DBPs that have been identified in disinfected water, only a fraction of which are regulated by drinking water guidelines, including trihalomethanes, haloacetic acids, bromate, and chlorite. Toxicity assessments have demonstrated that the identified DBPs cannot fully explain the overall toxicity of disinfected water; therefore, the identification of unknown DBPs is an important prerequisite to obtain insights for understanding the adverse effects of drinking water disinfection. Herein, we review the progress in identification of unknown DBPs in the recent five years with classifications of halogenated or nonhalogenated, aliphatic or aromatic, followed by specific halogen groups. The concentration and toxicity data of newly identified DBPs are also included. According to the current advances and existing shortcomings, we envisioned future perspectives in this field.

Exploring the ignored role of escaped algae in a pilot-scale DWDS: Disinfectant consumption, DBP yield and risk formation.

Insufficient treatments during bloom-forming seasons allow algae to enter the subsequent drinking water distribution system (DWDS). Yet, scarce information is available regarding the role escaped algae to play in the DWDS, and how they interact with the system. Thus, three scenarios were conducted: a pilot DWDS with algae (a), pipe water (b), and pipe water with algae (c). Experimental results showed that, compared to biofilm and bulk water, escaped algae required fewer disinfectants. Competition for disinfectants varied with algal strains (Microcystis aeruginosa, MA; Pseudanabaena sp., PS) and disinfectant types (chlorine, Cl2; chloriamine, NH2Cl). Algae in the MA-Cl2 group showed the highest demand (6.25%-36.02%). However, the low-concentration disinfectants distributed to algae could trigger distinct algal status alternations. Cl2 diffused into intact MA cells and reacted with intracellular compositions. Damaged PS cells reached 100% within 2 h. Typical disinfection byproducts (DBPs), including trihalomethanes (THMs), haloacetic acids and halogenated acetonitriles were examined. Disinfectant types and algal strains affected DBP yield and distribution. Although disinfectants consumed by algae might not promote dissolved DBP formation, especially for THMs. DBP formation of the other components was affected by escaped algae via changing disinfectant assignment (reduced by 45.45% for MA-Cl2) and transformation efficiency (by 34.52%). The cytotoxicity risks were estimated. Dissolved DBP-induced risks were not added when escaped algae occurred, whereas disruption and release of intracellular substances increased risks; the maximum cytotoxicity did not occur at 12 h rather than at the end (24 h). Overall, this study provided an innovative perspective on algal-related water quality issues in water systems.

Removal performance of dissolved organic matter from municipal secondary effluent by different advanced treatment processes and preventing the formation of disinfection by-products.

Various advanced treatment processes including ultrafiltration (UF), ozonation, enhanced coagulation, and biological aerated filter (BAF) have been applied to reduce dissolved organic matter (DOM) from the secondary effluent of municipal wastewater treatment plants (MWTPs). In this study, DOM were characterized and the relationship between DOM characteristics and disinfection by-products (DBPs) generation was investigated systematically. Results showed that BAF and ozonation processes could significantly affect DOM characteristics in the treated effluents and the following DBP generation. UF and enhanced coagulation reduced the production of DBPs by removing large molecular hydrophobic organics. The removal of low molecule DOM by BAF resulted in a 67.6% reduction in trihalomethanes (THMs) production. Ozonation could oxidize large hydrophobic DOM into small hydrophilic molecules containing aldehyde and ketone groups, leading to 54% increase of halogenated aldehydes (HALs) and halogenated ketones (HKs). Humic acid (HA) was the main organic type in DOM and important precursor for THMs and dichloroacetonitrile (DCAN) formation. The generation of trichloromethane (TCM) showed a significant positive correlation (R2 = 0.987) with the specific ultraviolet absorbance at 254 nm (SUVA). Large molecule hydrophobic DOM devoted the most to the formation of carbonaceous disinfection by-products and [Formula: see text]-N content was an important factor affecting the generation of nitrogenous disinfection by-products. These results are important for the optimization of advanced treatment process in MWTPs, and controlling DBPs should consider the removal of low MW hydrophobic DOM and the reduction of SUVA.

Total organic halogen (TOX) in drinking water: Occurrence, correlation analysis, and precursor removal during drinking water treatment.

Total organic halogen (TOX) in drinking water provides a measurement of the overall organic halogenated disinfection by-products (DBPs) formed during disinfection. Yangtze River Delta is one of the regions with the highest population density, the fastest urbanization process, and the most severe water pollution in China. Collecting water samples from full-scale drinking water treatment plants (DWTPs) in this region, this study firstly surveyed TOX occurrence in drinking water. Besides, the correlation of TOX formation potential (TOXFP) and trihalomethane formation potential (THMFP) with general water quality parameters (e.g., dissolved organic carbon [DOC], UV254, and specific ultraviolet absorbance) and the removal efficiencies of TOX precursors by different water treatment processes were also investigated. TOX levels in DWTP effluents (i.e., finished water) ranged from 29 to 165 µg/L (median 67 µg/L), and those in simulated distribution system waters ranged from 101 to 276 µg/L (median 158 µg/L). There were generally higher linear regression coefficient values for raw water (R2 = 0.51-0.88) than for treated water (R2 = 0.33-0.64) in terms of the relationship between DBP formation potentials and general parameters. However, a relatively stronger correlation between THMFP and TOXFP was observed for treated water (R2 = 0.80, p < 0.001) than for raw water (R2 = 0.64, p < 0.001). The overall treatment efficiencies of investigated parameters in DWTPs generally followed the order of UV254 > DOC > TOX precursors > THM precursors. Notably, the overall removal rates of DOC and TOX precursors in summer (averaging 59 % and 54 %, respectively) were obviously higher than those in winter (averaging 39 % and 38 %, respectively), which was assumed to be related to the seasonal variation of bioactivity in sand filter. These results could expand the knowledge of TOX in drinking water, and provide valuable perspectives to water industry and DBP research.

Trihalomethanes in water samples: Recent update on pretreatment and detection methods.

Trihalomethanes (THMs) are classified as volatile organic compounds, considered to be a disinfection by-product during water disinfection process. THMs have been shown to be cytotoxic, genotoxic and mutagenic, with a risk of cancer when they contact with people directly. To protect public health and monitor water quality, it is important to monitor and measure THMs in drinking water. Therefore, it is crucial to develop fast, accurate, highly sensitivity and green analysis methods of THMs in various complicated matrices. Here, this review presents an overall summary of the current state of the pretreatment and detection methods for THMs in various sample matrices since 2005. In addition to the traditionally used pretreatment methods for THMs (such as headspace extraction, microwave-assisted extraction, liquid-liquid extraction), the new-developed methods, including solid-phase extraction, QuEChERS and different microextraction methods, have been summarized. The detection methods include gas chromatography-based methods, sensors and several other approaches. Additionally, benefits and limitations of different techniques were also discussed and compared. This study is anticipated to offer fruitful insights into the further advancement and widespread applications of pretreatment and detection technologies for THMs as well as for related substances.

Wildfire impact on disinfection byproduct precursor loading in mountain streams and rivers.

We investigated short (first post-fire precipitation)- and long-term (11-month) impacts of the Caldor and Mosquito Fires (2021 and 2022) on water quality, dissolved organic matter, and disinfection byproduct (DBP) precursors in burned and adjacent unburned watersheds. Both burned watersheds experienced water quality degradation compared to their paired unburned watersheds, including increases in dissolved organic carbon (DOC), dissolved organic nitrogen (DON), and DBP precursors from precipitation events. DBP precursor concentrations during storm events were greater in the Caldor Fire's burned watershed than in the unburned watershed; precursors of trihalomethanes (THMs), haloacetic acids (HAAs), haloacetonitriles (HANs), and haloacetamides (HAMs) were 533 µg/L, 1,231 µg/L, 64 and 58 µg/L greater. The burned watershed of the Mosquito Fire also had greater median concentrations of THM (44 µg/L), HAA (37 µg/L), HAN (7 µg/L), and HAM (13 µg/L) precursors compared to the unburned watershed during a storm immediately following the fire. Initial flushes from both burned watersheds formed greater concentrations of more toxic DBPs, such as HANs and HAMs. The Caldor Fire burn area experienced a rain-on-snow event shortly after the fire which produced the greatest degradation of water quality of all seasons/precipitation events/watersheds studied. Over the long term, statistical analysis revealed that DOC and DON values in the burned watershed of the Caldor Fire remained higher than the unburned control (0.98 mg C/L and 0.028 mg N/L, respectively). These short and long-term findings indicate that wildfires present potential treatment challenges for public water systems outside of the two studied here.